Lithium battery performance encounter difficulties?
The goal of the lithium battery industry is to develop batteries with stronger functions, greater capacity, longer life, shorter charging times, and lighter weight. Lithium-ion batteries usually consist of a negative electrode (anode), a positive electrode (cathode) and a membrane. Lithium compounds used in lithium batteries have specific particle size distribution requirements, and the use of ultra-fine lithium powder can improve battery performance, including higher available capacity, longer service life, faster charging rate, higher efficiency, consistent discharge rate, and reduced size and weight.
In addition to the mechanical and thermal resistance of the membrane, the quality and safety of the battery can be affected by chemical composition, shape, and particle size distribution of the active material, and the homogeneity of the battery. After continuous research and development, ALPA has a set of perfect lithium battery anode and cathode material processing scheme and equipment that can meet complex process requirements, including dust-free feeding, magnetic separation, ultra-fine grinding, sınıflandırma, powder transport, metering packaging, automatic batching, intelligent control, and other powder process integrated design.
Typical materials of cathode materials for lithium-ion batteries
- LCO（Lithium Cobalt Oxide，LiCoO2）
- NCA（Lithium Nickel Cobalt Aluminum Oxide，LiNiCoAlO2）
- NMC（Lithium Nickel Manganese Cobalt Oxide，Li [NiCoMn] O2）
- LMO（Lithium Manganese Oxide，LiMn2O4）
- LFP（Lithium Iron Phosphate，LiFePO4）
- Lithium Carbonate（Li2CO3）
- Lithium Hydroxide（LiOH）
Introduction of anode materials for lithium-ion batteries
Lithium-ion battery anode materials include flake natural graphite, mesophase carbon microspheres and petroleum coke-based artificial graphite. Carbon material is currently the main negative electrode material used in lithium-ion batteries, and its performance affects the quality, cost and safety of lithium-ion batteries. The factors that determine the performance of anode materials are not only the raw materials and the process formula, but also the stable and energy-efficient carbon graphite grinding, spheroidizing, shaping and grading technologies.
İşbirliği Yapan Müşteriler
Proje Örnekleri
Yunanistan merkezli kalsiyum karbonat üreticisi, Epic Powder'ın hava sınıflandırıcılı değirmeniyle üretimini artırdı.
MBS-3 Hava Sınıflandırıcısı, 6 t/h hızla stabil D97 75μm kuvars kumu üretiyor.
Korece Grafit Anot Tozu Öğütme Pim Değirmeni Projesi
Yunanistan'da Alçı Tozu Sınıflandırma Hava Sınıflandırıcı Projesi
Yunanistan'da Dolomit Öğütme Halkalı Silindirli Değirmen Projesi
Zhejiang'da Toner Tozu Öğütme Jet Değirmeni Projesi
We can provide processes and equipment that meet the following performance indicators
- Available particle size D50:3~45μm.
- Full ceramic protection, increased amount of metal <20ppb
- Complete Closed-loop grinding system, moisture increase <100ppm
- Hourly output of a single device can be more than 1000kg(1)
- The linear speed of ceramic grinding disc and classifying wheel can reach 100m/s
- Impact mill can directly replace jet değirmeni to produce, single crystal NCM materials, saving 30%(2) of energy consumption.
İLETİŞİME GEÇİN
Uzmanlarımız, makine ve süreç ihtiyaçlarınızı görüşmek üzere 6 saat içinde sizinle iletişime geçecektir.
Fabrika Adresi:
HAYIR. 369, Yol S209, Huanxiu, Qingdao Şehri, Çin