• 11 Oct, 2022
• By EPIC Powder
• 2 Comments

Do you know how to use air classifier? Umico Powder Machinery

Today, the air flow classifier manufacturer will introduce some common sense of the air flow crusher to you. I hope it will help you. Let's get to know

Adjustment and maintenance of the air flow classifier< Br/>2. 0.6-12mm screen pieces of various specifications. When replacing, the light shall face downward< Br/>3. The bearing shall be regularly filled with high-speed grease and checked once every half a month. In case of serious wear, it shall be replaced or repaired in time< Br/>4. Main wearing parts of air classifier: flat teeth, round teeth, large and small grinding teeth. Flat teeth and round teeth are made of fine steel. They are in good dynamic balance and should be replaced in case of serious wear. The size of self-made metal processing should be specified, and the weight difference of each piece should not be more than 1g, so as to avoid damage to bearings and machines due to vibration< Br/>5. If it cannot work normally due to manufacturing reasons, users can directly contact the manufacturer for free warranty

Precautions for air flow classifier. An appropriate amount of even feeding is required during operation. If there are semi wet and non dry materials, it is recommended to dry them in the sun or reduce the feeding amount< Br/>2. The operator shall stand at the side of the feeding mouth, and shall not stretch his hand into the feeding mouth. The machine cover shall not be opened until the machine stops stably during operation

Maintenance and storage of the air flow classifier< Br/>2. All oil injection holes shall be filled with oil regularly, and the bearing parts shall be cleaned and filled with lithium base grease every six months< Br/>3. Regularly check the fastening of each component to prevent it from loosening and falling off and damaging the machine< Br/>4. When the machine is stopped, the sundries outside the machine should be removed, all rotating parts should be filled with grease, and stored in a warehouse with dry air and no corrosive gas< Br/>
The above is all about common sense of air flow classifier. I hope it will be helpful to you. For more information, please pay attention to the manufacturer of air flow crusher