• 31 Oct, 2022
• By EPIC Powder
• 2 Comments

The air flow pulverizer shall be operated in strict accordance with the instructions and maintained regularly

In the process of powder preparation by air flow pulverizer, the purpose of powder refinement is mainly achieved by the high pressure air flow to make the powder collide with each other. Because of its simple structure and no moving parts such as cutter and grinding plate, it can operate safely and stably, and has a high degree of automation. It is widely used in military industry, food, medicine, chemical industry, new energy and other fields

When using the air flow pulverizer, the operating instructions should also be strictly followed. The key issues to be noted are: 1. The feeding of the equipment is uniform and continuous. It is necessary to ensure that there is a continuous supply of materials in the crushing chamber, so as to meet the concentration requirements for material crushing. 2. The materials entering the air flow crusher shall be as small as possible. First, the materials shall be pre crushed to improve the discharging speed and fineness. 3. For the maintenance of the air flow crusher, it should be noted that dangerous operations cannot be carried out when the machine is not stopped stably to avoid serious consequences. The raw materials shall not be mixed with impurities, such as iron and sand, to avoid damaging the equipment. The equipment shall be lubricated and maintained according to the specified requirements to extend its service life. It is strictly prohibited to use machinery and equipment beyond performance and overload, which may easily damage the equipment. Regular maintenance and repair shall be carried out during the use of the air flow pulverizer system to ensure stable operation, reduce downtime and improve the utilization rate of the air flow pulverizer. The equipment use and maintenance personnel shall pay attention to and timely lubricate the equipment, which can ensure the normal operation of the whole system and extend the service life of the equipment. The bearing part of the crusher is very easy to break down, and it is worn heavily in use, so it needs regular maintenance and oil filling to increase the service life of the bearing. In addition, the temperature is too low in winter, which makes the working environment difficult. Many production lines work in the open air to produce materials. Bearing oil is easy to freeze, so we should pay attention to it frequently. In order to ensure the good working condition of the air flow mill, reduce the wear of the air flow mill, extend the service life, and reduce unnecessary energy consumption, the use and maintenance personnel should be able to perform regular maintenance and correctly handle the relationship between use, maintenance and repair. It is not allowed to use only or repair only