• 26 Oct, 2022
• By EPIC Powder
• 2 Comments

What are the characteristics of jet mill and screen mill? EPIC Powder Machinery

Airflow pulverizer is applicable to superfine pulverization of dry powder materials, with large impact particle size, which can reach more than Mach 2.5, and general materials can be easily crushed to 1-10 microns. Air flow crusher is suitable for dry crushing of various raw materials with Mohs hardness below 9, especially for crushing of high toughness, high purity and high efficiency raw materials

1. What are the characteristics of jet mill and screen mill if compared from the scale of use? The air flow fan machine and the screen crusher are both within the category of the crusher. The airflow pulverizer transforms the ordinary air in the air source into inert gases such as nitrogen, carbon dioxide, etc., which can make the machine become an inert gas maintenance equipment, and is applicable to the crushing and grading processing of flammable, explosive, easily oxidized and other materials. However, if we look down from the use scale, it is the latter, that is, the screen crusher, whose use scale should be wide. As the air flow crusher stops crushing materials within 5mm, it has certain limitations. 2. What are the secondary factors related to the crushing capacity and disposal capacity of jet mill? For the crushing capacity and disposal capacity of the air flow crusher, the relevant factors are mainly the detailed use of the crusher and its specifications. In addition, through these, we can confirm the numerical value of the crushing amount and disposal amount of the air flow mill to make it suitable. 3. If there is too little feed in the air flow crusher, what impact will it have? And, what is the collection of finished products in the crusher related to? If there is too little feed in the air flow pulverizer, there will be adverse effects on the pulverizer itself. At least, it will reduce the crushing quality and consequences. Because in the air flow crusher, the high-speed air flow is used to make the materials collide violently, so as to achieve the crushing result. If the feed is too little, it cannot be completed well. As for the collection of finished products in the pulverizer, it depends on the collector. 4. What are the detailed reasons why the particle size of the jet mill does not fluctuate (Note: it is stable and peaceful; there is no change)? If the particle size of the air flow pulverizer does not fluctuate (note: stable and peaceful; no change), there are two reasons in detail. One is that the deployment is unreasonable, or the loss in the fragmentation is too large, so that the particle size of the finished product does not fluctuate (note: stable and peaceful; no change). Second, there are changes in operation, but the changes are unreasonable or inappropriate, which will also lead to the above achievements. The whole crushing process of air flow pulverizer is carried out with the help of the impact between raw materials themselves, which is different from the impact crushing of raw materials by mechanical equipment with the help of knives or hammers. Therefore, the machinery and equipment are abrasion resistant and the raw materials have high purity