• 24 Oct, 2022
• By EPIC Powder
• 2 Comments

What can air flow pulverizer used in battery material industry crush into Chengyoumingke powder machinery

The average particle size of the material can reach 1-74 microns, and the particle size can be adjusted at will. It is an indispensable processing equipment in the battery material industry. So the question is, to what extent can the jet mill crush? It is related to the following factors:

1. The initial fineness of raw materials, which is generally required to be less than 50 meshes in our jet mill< Br/>
2. It is related to the physical properties of materials. It is related to the fluidity and particle uniformity of materials. Some materials have poor fluidity, many impurities and high solvent content, which may lead to material blockage during the production process. At this time, special equipment is required. Not all materials can be crushed with standard equipment to achieve crushing fineness< Br/>
3. It is related to the crushing pressure in the crushing process. Some equipment feed pressure is greater than the crushing pressure, and some equipment crushing pressure is greater than the feeding pressure. Specific materials need specific design< Br/>
4. It is related to the feeding speed. Not all materials have good fluidity. Whether screw feeding or vibration feeding is used, the feeding process is a very important factor. Some very fine materials are difficult to be fed. In this case, a special personalized configuration is required to achieve the feeding effect< Br/>
5. It is also related to the degree of optimization of air flow mills. There are many manufacturers of air flow mills, but the fineness of the same material produced by different manufacturers is different, even though the fineness produced by different models of equipment from the same manufacturer is different. However, according to experience, the effect of equipment with larger crushing discs is better than that of equipment with smaller crushing discs< Br/>
6. It is related to the proficiency of operators. Some equipment needs to be started under small pressure first and then under large pressure, while others need to be started in one step< Br/>
It can be seen from the above that the fineness of the air jet mill is not fixed, but adjustable and variable. That is why it has become a popular processing equipment in all industries, which can meet the diversified needs of different users. Qingdao Youmingke has been deeply involved in the battery industry for many years, and has rich experience and very mature solutions for the crushing, grading, breaking and shaping of battery raw materials, And it has a high reputation in the battery industry at home and abroad. You are welcome to call us for consultation and negotiation