• 21 Oct, 2022
• By EPIC Powder
• 2 Comments

To prevent the purchase of low-quality jet mill, you should follow these steps

Airflow pulverizer is suitable for the universality of raw materials, so that it has been recognized by the majority of users, and has been more widely popularized and used. The choice of an air flow pulverizer depends mainly on whether it is suitable for the raw materials to be processed by itself. If it is not based on this, then it is likely to buy low-quality equipment or equipment not required for its own production, which will bring huge losses to future production

So the following steps should be followed when selecting an air flow pulverizer:
1. To test materials, the purpose of the test is to see the particle size distribution< Br/>2. It depends on the operability of the equipment and should be as simple and clear as possible< Br/>3. Check whether the equipment is easy to clean and whether there is any dead space< Br/>4. View the collection rate of materials< Br/>5. Look at the problems that may occur during the crushing process. The more problems you find during the experiment, the better. In this way, the purchased equipment will meet the needs in the future< Br/>6. Look at the comparison between the feeding pressure and crushing pressure of the crushing disk. At present, the feeding pressure of most manufacturers is higher than the crushing pressure, mainly because they are afraid of reverse blowing. However, the crushing effect is better when the crushing pressure is large. Therefore, try to choose equipment with large crushing pressure and small feeding pressure, and the particle size distribution is more centralized when the crushing pressure is large< Br/>7. Select the equipment with only one collection port. Due to the limitation of technical capacity, there are many equipment that need two locations to collect materials after crushing, which will cause problems in the uniformity of materials. After crushing, two materials will be mixed, adding links. Therefore, select the equipment with only one collection port< Br/>8. Do not use pulse back blowing dedusting equipment for feeding, which will affect the particle size distribution< Br/>9. Considering the feeding method of materials, some feeding methods are from one of the nozzles of the crushing disk. The diameter of this nozzle is more detailed than that of other nozzles, so its capacity will be greater than that of other nozzles, which will cause the materials entering the crushing disk to be closer to the outlet, leading to the appearance of large particles and poor particle size distribution< Br/>The above is what you need to do to select an air flow crusher. What will you gain after reading it? Qingdao Youmingke, as the source manufacturer of air flow pulverizers in China, reminds users that when choosing air flow pulverizers, they must not judge the applicability of the equipment by its price. In China, it has been a long time since the habit of seeking small and cheap things was spread. It is precisely because so many people are deceived, so they hope to carefully consider the performance Choose from the quality