• 08 Nov, 2022
• By EPIC Powder
• 2 Comments

How to solve the problems that may occur in the use of air jet mill? EPIC Powder Machinery

Airflow pulverizer is a mechanical equipment commonly used in industry. During operation, internal equipment is sometimes unstable, vibration occurs in actual operation, internal noise is great, and particles at the outlet of materials do not meet the standard. What is the matter? Now let's talk about the problems that may occur in the use of air flow pulverizer

Airflow pulverizer is that compressed air is accelerated into supersonic airflow through Laval nozzle and then injected into the pulverizing area to fluidize the materials (the airflow expands as fluidized bed floats and boils and collides with each other), so each particle has the same motion state. These are all problematic. Air flow milling machine tools tend to think that the equipment is broken, but this is not the case. In most cases, it is caused by some incorrect operation during specific operation, or when the equipment is not installed in place. It is possible to leave a big gap in the middle or not to repair it, so we need to carefully check it. Do not panic when there are internal problems with the jet mill. First, check if there are any problems with our materials. If there is no problem, please carefully disassemble the equipment to check whether there is any installation problem inside the equipment or whether the chassis is in an unstable state. All these should be carefully checked. The reason for many equipment failures of air flow pulverizer is that the chassis is often unstable, causing a lot of vibration and affecting the internal work. Therefore, we must pay attention to this problem. If there is a problem, the power and device switches will be turned off first. Then slowly check the key